Panasonic KX-TD500 - Page 70

Station Programming
70 User Manual
Log-In / Log-Out Button (Assignment)
Allows you to assign a Flexible (CO) button as a Log-In / Log-Out button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Loop-CO (L-CO) Button (Assignment)
Allows you to assign a Flexible (CO) button as a Loop-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
PT
Press the desired Flexible (CO)
button you wish to assign as
the Log-In/Log-Out button.
Dial 71.
Press STORE.
AUTO DIAL
(CO )
STORE
1
7
The STORE indicator lights.
The display shows the initial programming mode.
<PT Display Example>
Login/Logout
PT
Press the desired Flexible
(CO) button you wish to assign
as the L-CO button.
Press STORE.
Dial .
AUTO DIAL
(CO)
STORE
The STORE indicator lights.
The display shows the initial programming
mode.
<PT Display Example>
Loop-CO