Station Programming
74 User Manual
Primary Directory Number (PDN) Button (Assignment)
Allows you to assign a Flexible (CO) button as a PDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• A PDN button can be assigned to any one of the flexible CO buttons on a PT by Station,
User or System Programming. Up to three PDN buttons can be assigned to any flexible CO
button on a PT. However, the first PDN button should always be assigned to the CO 01
button regardless of the number of the PDN buttons assigned.
PT
Press the desired Flexible (CO)
button you wish to assign as a
PDN button.
Dial 74.
Press STORE.
AUTO DIAL
(CO)
STORE
4
7
The STORE indicator lights.
The display shows the initial programming mode.
<PT Display Example>
PDN
To Next Page
Loading...
