Panasonic KX-TD500 - Page 76

Station Programming
76 User Manual
Secondary Directory Number (SDN) Button (Assignment)
Allows you to assign a Flexible (CO) button as an SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• An SDN button should have its associated PDN button of another extension. This
assignment is available for extensions on which at least one PDN button is already assigned
(DN type PT). Otherwise, the SDN button dose not function.
• Up to three different SDN buttons can be assigned to a PT.
• Up to eight SDN buttons per PDN button can be assigned to eight different PTs respectively.
<PT Display Example>
<PT Display Example>
(-xxxx:extension number)
To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
SDN—
CLR
SDN—xxxx
CLR
PT
Press the desired Flexible
(CO) button you wish to
assign as an SDN button.
Dial 75.
Press STORE.
Enter the extension number
(3 or 4 digits) of the owner
extension.
extension no. of the
owner extension
AUTO DIAL
(CO)
STORE
5
7
The STORE indicator lights.
The display shows the initial
programming mode.