Station Programming
78 User Manual
Tone Through Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Tone Through button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
Features Guide References
1.12 Conversation Features
• End-to-End DTMF Signaling (Tone Through)
PT
Press the desired Flexible (CO,
DSS) button you wish to assign
as the Tone Through button.
Dial 78.
Press STORE.
AUTO DIAL
STORE
8
7
<PT Display Example>
Tone Through
The STORE indicator lights.
The display shows the initial programming
mode.
To Next Page
Loading...
