Station Programming
User Manual 93
Idle Line Preference — Outgoing (Assignment)
When you go off-hook to make a call, you are connected to an idle line automatically.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM].
PT
Dial 2.
Press STORE.
Dial 1.
1
2
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
The display shows the current
status.
<PT Display Example>
Pref.Out:Idle
To Next Page
Loading...
