Panasonic KX-TDA50

1. Flexible Numbering (available while a dial tone is heard)
2. Flexible Numbering (available while busy, DND, or ringback tone is heard)
3. Fixed Numbering (available while dialing or talking)
1. Flexible Numbering (available while a dial tone is heard)
Extension numbers and feature numbers which are available while a dial tone is heard can be customized
for easy use. The numbers must not conflict. It is also possible to use default (Pattern 1 or Pattern 2) shown
in the following table:
a. Extension Numbers: Extension numbers consist of leading numbers and additional numbers.
Extension numbers (consisting of "0" through "9") can be assigned as follows:
• Numbering schemes: 1-64
• Leading number: up to three digits
• Additional number: up to two digits (default: two digits)
[Example]
If the number "3" is programmed as a leading number for the 1st extension numbering scheme, and
"XX" is programmed as the additional digits, extension numbers 300 through 399 are available.
b. Feature Numbers: Up to four digits, consisting of 0-9, "
", and "#"
c. Other
PBX Extension Numbers (Other PBX Extension Number [TIE] 01 through 16): Up to three
digits, consisting of 0-9, "
", and "#"
[Flexible Numbering Table (available while a dial tone is heard)]
Feature
Default
Pattern 1
(with )
Pattern 2
(without )
KX-TDA50/
KX-TDA100/
KX-TDA200
KX-TDA600
Extension Numbering Scheme 1—
Leading Number
1 10 / 20 10
Extension Numbering Scheme 2—
Leading Number
2 11 / 21 11
Extension Numbering Scheme 3—
Leading Number
3 12 / 22 12
Extension Numbering Scheme 4—
Leading Number
4 13 / 23 13
Extension Numbering Scheme 5—
Leading Number
None 14 / 24 14
Extension Numbering Scheme 6—
Leading Number
None 15 / 25 15
Extension Numbering Scheme 7—
Leading Number
None 16 / 26 16
Extension Numbering Scheme 8—
Leading Number
None 17 / 27 17
Extension Numbering Scheme 9—
Leading Number
None 18 / 28 18
112 Feature Manual Document Version 2010-11
6.1.4 Flexible Numbering/Fixed Numbering