Panasonic KX-TDA50

Hold
Hold
(to be Retrieved from
Another Extension)
*1
Transfer to CO
Line
Transfer to
Extension
Mode 4
Flashing the
hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Hold Feature No.
+
Going on-hook
Flashing the
hookswitch
+
Hold Feature No.
+
CO Line Access
No.
Flashing the
hookswitch
+
Hold Feature No.
+
Extension No.
*1
These operations must be performed when the held call is intended to be retrieved from another extension using the holding
extension number.
If one of the following occurs frequently with an SLT, choose
"Mode 2", "Mode 3", or "Mode 4":
a. When an SLT user answers a call, a reorder tone is heard or no one is heard on the other end.
b. When an SLT user goes off-hook, a reorder tone is heard instead of a dial tone.
If a call is not terminated after going on-hook, the above cases occur. To avoid these problems, choose
"Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless the Hold feature number is entered
after flashing the hookswitch in Mode 2, Mode 3, and Mode 4.
• Hold Alarm tone pattern has a default. (® 21.3 Tones/Ring Tones)
PC Programming Manual References
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→
Recall—Hold Recall
→ Recall—Disconnect after Recall
4.8 [2-6-1] Numbering Plan
—Main—Features
→
Call Hold / Call Hold Retrieve
→ Call Hold Retrieve : Specified with a Holding Extension Number
→ Hold Retrieve : Specified with a Held CO Line Number
4.17 [2-9] System Options
→Option 1— PT Operation—Automatic Hold by ICM / CO / ICD Group key
→Option 1— PT Operation—Hold Key Mode
→Option 5— SLT—SLT Hold Mode
PT Programming Manual References
[200] Hold Recall Time
Operating Manual References
1.3.6 Call Hold
3.1.3 Call Log, Incoming
Description
When a call containing Caller ID information is received by an extension, the information is shown on the
telephone display, notifying the extension user of the caller
’s identity. This information is also automatically
logged in the Incoming Call Log of the extension, and can be viewed later or used to call that caller back.
Each extension and incoming call distribution (ICD) group has its own Incoming Call Log.
38 Feature Manual Document Version 2010-11
3.1.3 Call Log, Incoming