Feature Description
(4) OPX Off Premise Extension
(OPX)
A single line telephone (SLT) which is installed off site
can perform as if it were installed locally. The SLT
makes and receives calls through the PBX. An
extension number can be given to the OPX, and
extension
data such as Class of Service (COS) is also
applied.
[Example]
Dials "103".
Extn.101
Extn.103
SLT
Telephone Company
T1-LCOT
T1 Card
T1-OPX
PBX
Extn.102
(5) ANI Automatic Number
Identification (ANI)
Receives the caller’s number from a T1 line.
When
the ANI number is received, it can be treated the
same as a Caller ID number. (3.1.1 Caller ID)
Conditions
• If
a T1 line is used as a public line, the channel type depends on the contract with the telephone company.
PC Programming Manual References
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.18 [1-1] Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
21.2 Exclusive Features Table
17.1.2 TAFAS (Trunk Answer From Any Station)
Description
A ring tone is sent through an external pager (loudspeaker) when an incoming call is received. Any extension
user can answer the call.
Conditions
• Hardware Requirement: A user-supplied external pager
• Floating Extension Number
Document Version 2010-11 Feature Manual 305
17.1.2 TAFAS (Trunk Answer From Any Station)