Panasonic KX-TDA50

PBX Code Method
PBX-1 (PBX
Code: 20)
TIE Line Network
Private network
PBX-2 (PBX
Code: 30)
Outside Caller
PBX-3
PBX-4
PBX-5
PBX-6
PBX-7
Telephone Company
Extn. 102
Fwd to VPS
PBX-8
Extn.
101
Extn.
101
VPS
Mailbox 101
Mailbox 201
Mailbox 730101
Mailbox 730102:
"Hello. I am not at
my desk right now."
Mailbox 730102
"7-30-102"
[TIE line
access no.]
[Extn. no.]
[PBX
code]
[Explanation]
Extension 102 does not answer the CO line call, so the call is forwarded to the VPS, using a VPS mailbox
number containing the TIE line access number, the PBX code of the PBX that received the call, and the
extension number that received the call.
This
mailbox number is the same as if an extension connected to PBX-1 called extension 102 of PBX-2. This
mailbox number should be programmed as the mailbox number and owner extension number on the VPS.
Multiple VPSs
More than one PBX in the network can have a VPS connected, and each VPS can provide voice mail services
for extensions connected to other PBXs in the network.
Conditions
• Hardware Requirement
The KX-TDA6920, KX-TDA0920 or KX-TDA5920 SD Memory Card for Software Upgrade to Enhanced
Version must be installed in the PBX connected to the VPS, and in all PBXs that will use this feature.
• All PBXs in the network must be KX-TDA series, KX-TDE series, or KX-NCP series PBXs. For information
on the hardware requirements for KX-TDE/KX-NCP series PBXs that share the same VPS, refer to the
corresponding Feature Manual.
• Only KX-TVA series VPSs connected using DPT integration support this feature.
• Mailboxes for extensions connected to other PBXs in the network must be set up manually.
• An extension can receive Message Waiting notifications from multiple VPSs connected to PBXs in the
network. When multiple notifications of the number of unheard messages in an extension user’s message
box are sent from different VPSs, the most recent notification will be displayed.
Document Version 2010-11 Feature Manual 247
13.1.14 Private Network Features—Centralized Voice Mail