Panasonic KX-TDA50

16.1.3 Speed Dialing, Personal
Description
An
extension user can make calls using abbreviated dialing for frequently dialed numbers which are stored in
the extension’s Personal Speed Dialing.
Personal Speed Dialing is also known as Station Speed Dialing.
Conditions
• Any number, such as a telephone number or feature number, can be stored in Speed Dialing. A name can
be assigned to each Personal Speed Dialing number through personal programming, and also to each
System Speed Dialing number.
• Call Directory—Speed Dialing
Display proprietary telephone (PT) users can make a call by selecting a stored name shown on the display.
• Display Lock
An extension user can lock the Personal Speed Dialing number display to prevent the numbers from being
viewed at any extension through personal programming (Display Lock). In this case, the Incoming/Outgoing
Call Log displays and the SVM Log display are also locked, and the voice messages in the user’s message
box cannot be played back. An extension personal identification number (PIN) is required to use this
feature. (® 5.1.6 Extension PIN (Personal Identification Number))
• When an EMEC or MEC card is installed in the PBX, the number of entries programmable for each
extension is increased.
Installation Manual References
KX-TDA50
2.5.7 MEC Card (KX-TDA5105)
KX-TDA100/KX-TDA200
2.3.2 MEC Card (KX-TDA0105)
KX-TDA600
2.3.2 EMEC Card (KX-TDA6105)
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features
→
System Speed Dialing / Personal Speed Dialing
→ Personal Speed Dialing - Programming
6.4 [4-1-3] Wired Extension—Speed Dial
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
1.3.61 Speed Dialing, Personal
1.4.1 Call Log, Incoming
1.4.3 Directories
3.1.2 Personal Programming
3.3 System Programming
294 Feature Manual Document Version 2010-11
16.1.3 Speed Dialing, Personal