Panasonic KX-TDA50

• Call Park Retrieve Deny
Internal Call Block (® 9.1.14 Internal Call Block) also determines which extensions’ calls an extension
user can retrieve from a parking zone, i.e., if extension 101 cannot call extension 201, then it cannot retrieve
extension 201’s parked calls either.
PC Programming Manual References
4.4 [2-3] Timers & Counters
→ Recall—Call Park Recall
→ Recall—Disconnect after Recall
4.8 [2-6-1] Numbering Plan
—Main—Features—
Call Park / Call Park Retrieve
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (or Ringing Tone Type Number) (for Call Park)
6.18 [4-3] DSS Console
→ Type
→ Parameter Selection (for Call Park)
→ Optional Parameter (Ringing Tone Type Number) (for Call Park)
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.6 Call Hold
3.1.6 Call Pickup
Description
An extension user can answer a call ringing at any other extension.
The following types of Call Pickup are available:
Type Description
Directed A specified extension’s call is answered.
Group A call within a specified call pickup group is answered.
Call Pickup Deny
An extension user can prevent other extensions from picking up calls ringing at his or her own extension.
Conditions
• Call Pickup applies to:
Document Version 2010-11 Feature Manual 43
3.1.6 Call Pickup