Panasonic KX-TDA50

3.1.18 Confirmation Tone
Description
At
the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.
Type Description
Tone 1
a. Sent when the setting is accepted.
b. Sent when a call is received in voice
-calling mode (Alternate Receiving—
Ring/Voice). The caller’s voice will be heard after the tone.
Tone 2
a. Sent from an external paging device or an extension before being paged.
b. Sent when a call is received while an extension is in Hands
-free
Answerback mode.
Tone 3-1
a. Sent before a conversation is established using the Paging feature.
b. Sent to the caller when a conversation is established with an extension in
one of the following modes:
• Hands-free Answerback mode
• Voice-calling mode (Alternate Receiving
—Ring/Voice)
c. Sent when making a call to or from a doorphone.
Tone 3-2 Sent before a conversation is established when accessing the following
features by the feature numbers:
• Call Park Retrieve
• Call Pickup
• Hold Retrieve
• Paging Answer
• Trunk Answer From Any Station (TAFAS)
Tone 4-1 Sent when a call changes from a two-party call to a three-party call (e.g.,
Executive Busy Override, Conference, Privacy Release, Two
-way Record).
Tone 4-2 Sent when a call changes from a three-party call to a two-party call (e.g.,
Executive Busy Override, Conference, Privacy Release, Two
-way Record).
Tone 5 Sent when a call is placed on hold (including a consultation hold).
Conditions
• Confirmation Tone Patterns
All confirmation tone patterns have a default (® 21.3 Tones/Ring Tones).
• It is possible to eliminate each tone.
PC Programming Manual References
4.17 [2-9] System Options—Option 3
→ Confirmation Tone—Tone 1 : Called by Voice
→ Confirmation Tone—Tone 2 : Paged / Automatic Answer
→ Confirmation Tone—Tone 3-1 : Start Talking after Making Call / Call from Doorphone
→ Confirmation Tone—Tone 3-2 : Start Talking after Answering Call
→ Confirmation Tone—Tone 4-1 : Start Conference
→ Confirmation Tone—Tone 4-2 : Finish Conference
62 Feature Manual Document Version 2010-11
3.1.18 Confirmation Tone