Panasonic KX-TDA50

18.1 U
18.1.1 Upgrading the Software
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Data File Storing Area
Main Processing (EMPR/MPR) software
data
Operating system data area on either the EMPR card of
the KX-TDA600, the MPR card of the KX-TDA100/
KX-TDA200, or the Main Board of the KX-TDA50.
Default system programming data for each
country/area
Country/area data area on the EMPR card, MPR card, or
Main Board
Language data for PT display Each language data area on the EMPR card, MPR card,
or Main Board.
There are two types:
Type
1: Proprietary Telephone (PT) display except for PT
system programming (® 13.1.29 PT Programming) (five
languages max.)
Type 2: PT system programming data (one language
max.)
LPR (software on a slot card) software data
(KX-TDA100/KX-TDA200/KX-TDA600
only)
Flash ROM on the appropriate optional services card (e.g.,
DHLC, DLC, T1, PRI, etc.)
Cell Station (CS) software data Flash ROM on the CS
Conditions
• The software version of the EMPR or MPR card can be confirmed through system programming.
Installation Manual References
KX-TDA100/KX-TDA200
2.3.1 MPR Card
KX-TDA600
2.3.1 EMPR Card
PC Programming Manual References
3.3 [1-1] Slot—Card Property - MPR—
Memory Version:
PT Programming Manual References
[190] Main Processing (MPR) Software Version Reference
326 Feature Manual Document Version 2010-11
18.1.1 Upgrading the Software