Panasonic KX-TDA50

[Programming Example of Ring Tone Pattern Table]
Table
No.
Intercom
Call/Hold
Recall
CO Line Call/
Hold Recall
Doorphone
Call Timed
Reminder
Call
Back
LCS
External
Sensor
TRG1 ... Port 1 ...
1 Double Single Single
2 Single Double Double
: : : : : : : : : :
Conditions
• "PT
Ring Off Setting" can be enabled or disabled through system programming. If disabled, PT users
cannot turn incoming call ringing off for their extension.
• For the S-CO, G-CO, L-CO, ICD Group, INTERCOM, PDN and SDN buttons, one of 30 ring tones can be
assigned through personal programming.
PC Programming Manual References
4.14 [2-8-1] Ring Tone Patterns—Call from CO—
Ring Tone Pattern Plan 1–8
4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
—
Ring Tone Pattern Plan 1–8
4.16 [2-8-3] Ring Tone Patterns—Call from Others— Extension—Ring Tone Pattern Plan 1–8
4.17 [2-9] System Options—Option 1— PT Operation—PT Ring Off Setting
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 1— Ring Pattern Table
→Option 6— ICM Tone
6.5
[4-1-4] Wired Extension—Flexible Button—
Optional Parameter (Ringing Tone Type Number) (for Loop
CO, Single CO, Group CO, ICD Group, SDN)
6.10 [4-2-1] Portable Station—Extension Settings
—Option 1—
Ring Pattern Table
6.18
[4-3] DSS Console—
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group
CO, ICD Group, SDN)
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
3.1.4 Customizing the Buttons—To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or
INTERCOM button (Digital proprietary telephone only)
15.1.3 Room Status Control
Description
A proprietary telephone (PT) with a 6
-line display designated as the hotel operator extension can be used to
view and change the Check-in/Check-out/Cleaned-up (Ready or Not Ready) status of guest rooms associated
with extensions.
Any wired extension can be used as a room extension without special programming.
282 Feature Manual Document Version 2010-11
15.1.3 Room Status Control