Panasonic KX-TDA50

Installation Manual References
KX-TDA50
2.5.2 ECHO8 Card (KX-TDA5166)
KX-TDA100/KX-TDA200
2.6.4 ECHO16 Card (KX-TDA0166)
KX-TDA600
2.8.6 EECHO16 Card (KX-TDA6166)
PC Programming Manual References
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
→
Unattended Conference—Recall Start Timer
→ Unattended Conference—Warning Tone Start Timer
→ Unattended Conference—Disconnect Timer
4.11 [2-7-1] Class of Service—COS Settings—TRS— Transfer to CO
4.17 [2-9] System Options—Option 3
→ Confirmation Tone—Tone 4-1 : Start Conference
→ Confirmation Tone—Tone 4-2 : Finish Conference
→ Echo Cancel—Conference
6.5 [4-1-4] Wired Extension—Flexible Button
—
Type
6.13 [4-2-3] Portable Station—Flexible Button
—
Type
6.18 [4-3] DSS Console— Type
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.15 Conference
3.1.17 Conference Group Call (KX-TDA50 only)
Description
Conference group calling allows you to call a pre
-determined group (conference group) of parties
simultaneously. An extension user can call a conference group of up to 31 call members to make a voice
announcement. Called PTs and KX-WT125/KX-WT126 PSs will automatically answer the call using the
speakerphone. Other telephones (SLTs and other PSs) will ring when the Conference Group Call is received,
and the users of those extensions can listen to the announcement by answering the call.
Members that are listening to the announcement can enable their ability to speak by pressing any of their dial
keys. After a user has pressed a dial key, his/her voice can be heard by all participants. This is useful in an
environment such as an office or a large home. A user can make an announcement requesting assistance or
confirmation, which is heard by all called extensions. Then, any called user can press a dial key to enable their
ability to speak, and their reply is then heard by all members.
Document Version 2010-11 Feature Manual 59
3.1.17 Conference Group Call (KX-TDA50 only)