Panasonic KX-TDA50

Operating Manual References
1.3.58 Quick Dialing
14.1.2 Quick Setup
Description
Basic
PBX parameters can be programmed the first time the PBX is accessed with a PC using the Maintenance
Console software.
When the PBX is accessed with the Installer Level Programmer Code and default password (®
13.1.3 Password Security), for the first time (i.e., accessed after the PBX’s settings have been initialized or
when the PBX’s settings are still set to their default values), Quick Setup will launch automatically. From here
the following basic parameters can be programmed as desired:
Item Parameter Description
Date & Time Set Year/Month/Date/
Hour/Minute
The date and time set on the PC can be used by default.
System Password
for Installer
4–10 characters
Enter the system password for installer (®
13.1.3 Password Security).
Operator &
Manager Extension Number
Assign a PBX operator. (® 12.1.5 Operator Features)
This
extension will be the operator for all time modes, and
is automatically assigned manager status to perform
manager operations. (® 11.1.1 Manager Features)
Flexible Numbering
Type
1. Pattern 1
(with
)
2. Pattern 2
(without )
Select whether or not the prefix "
" must be entered
before dialing feature numbers.
[Example] Call Pickup feature number
Pattern 1 (with ): 41
Pattern 2 (without ): 41
Note
that certain feature numbers (Line Access numbers,
Operator Call, etc.) never need this prefix.
For a list of the default flexible numbers, refer to the
[Flexible Numbering Table (available while a dial tone is
heard)] (® 6.1.4 Flexible Numbering/Fixed Numbering).
Extension Number From 101/from 201
(for KX-TDA50/
KX-TDA100/
KX-TDA200) or from
1001/from 2001 (for
KX-TDA600)
Determines the number from which default extension
numbers begin.
Operator 0/9 The feature number for Operator Call can be selected.
Local Access 0/1/9 The feature number for Idle Line Access can be selected.
Remote
Maintenance
Number
Remote Maintenance
Dial Number
Enter the complete telephone number of the PBX
(including the country code). When necessary, this
number will be used to access the PBX from a remote
location for maintenance purposes.
Note that the programmable items may vary depending on the version of Maintenance Console being used.
Document Version 2010-11 Feature Manual 277
14.1.2 Quick Setup