Panasonic KX-TDA50

PC Programming Manual References
3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—
Networking Data Transfer
4.11 [2-7-1] Class of Service—COS Settings—Extension Feature
—
Manager
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Dial (for NDSS)
6.8 [4-1-6] Wired Extension—NDSS Link Data - Send
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Dial (for NDSS)
6.15 [4-2-4] Portable Station—NDSS Link Data - Send
6.18 [4-3] DSS Console
→ Type
→ Dial (for NDSS)
11.2 [9-2] Network Data Transmission
11.3 [9-3] Network Operator (VoIP)
11.4 [9-4] NDSS Key Table
PT Programming Manual References
[511] Manager Assignment
Feature Manual References
13.1.13 PRIVATE NETWORK FEATURES
13.1.18 PRIVATE NETWORK FEATURES—QSIG
13.1.23 Private Network Features—VoIP (Voice over Internet Protocol)
Operating Manual References
1.2.1 Making Calls
2.1.4 Private Network Features—NDSS (Network Direct Station Selection) Monitor Release
13.1.16 Private Network Features—Network ICD Group
Description
An
Incoming Call Distribution (ICD) Group can include up to 4 destinations at other PBXs in a private network,
including the floating extension number of another ICD Group. This is done by assigning a virtual PS as a
Document Version 2010-11 Feature Manual 253
13.1.16 Private Network Features—Network ICD Group