EasyManua.ls Logo

Panasonic KX-TDA50

Panasonic KX-TDA50
384 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PC Programming Manual References
4.10 [2-6-3] Numbering Plan
—B/NA DND Call Feature—
Call Monitor
4.11 [2-7-1] Class of Service—COS Settings—CO & SMDR— Call Monitor
6.1 [4-1-1] Wired Extension—Extension Settings
→Option 2— Data Mode
→Option 3— Executive Override Deny
6.10 [4-2-1] Portable Station—Extension Settings
—Option 3—
Executive Override Deny
Feature Manual References
3.1.20 COS (Class of Service)
Operating Manual References
1.3.7 Call Monitor
3.1.5 Call Park
Description
An
extension user can place a call into a common parking zone of the PBX. The Call Park feature can be used
as a transferring feature; this releases the user from the parked call to perform other operations. A parked call
can be retrieved by any extension user.
Conditions
Automatic Call Park
It is possible to select an idle parking zone automatically.
Retry
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the originator
will hear a busy tone. Retrying is possible while hearing a busy tone by selecting another parking zone or
a vacant zone.
Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, the Call Park Recall tone will be heard
at the Transfer Recall destination assigned to the extension which parked the call. If the destination is
engaged in a call, the Hold Alarm will be heard.
If a parked CO line call is not retrieved within a preprogrammed time period (Default: 30 minutes), it is
automatically disconnected.
Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
Any flexible button can be customized as the Call Park button. It shows the current status of the preset
parking zone as follows:
Light pattern Status
Slow red flashing A call is parked in the preset parking zone
Off There are no parked calls
Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically.
Any flexible button can be customized as the Call Park (Automatic Park Zone) button.
42 Feature Manual Document Version 2010-11
3.1.5 Call Park

Table of Contents

Other manuals for Panasonic KX-TDA50

Related product manuals