Item Description
Caller’s identification Controls whether the caller’s identification number, name,
number
and name, or nothing is shown. If "none" is selected, <I>
will not be shown.
13.1 [11-1] Main—SMDR Options—
SMDR Options—Caller
ID Number & Name
DID number Controls whether the DID numbers, names, numbers and names,
or
nothing is shown. If "none" is selected, <D> will not be shown.
13.1 [11-1] Main—SMDR Options—
SMDR Options—DID
Number & Name
Secret dialing Controls the display of secret dialing, when ARS dial above, is set
to show ARS-modified numbers. If enabled, numbers dialed
secretly will be shown as dots.
If
ARS dial is set to show the user-dialed numbers, secretly dialed
numbers are always shown as dots in SMDR, regardless of this
setting.
13.1 [11-1] Main—SMDR Options—
SMDR Options—Secret
Dial
Date order Controls the date format (MM-DD-YY, DD-MM-YY, YY-MM-DD,
YY-DD-MM).
13.1 [11-1] Main—SMDR— SMDR Format—Date Format
Received call Controls whether the time of receiving an incoming CO line call
is shown.
13.1 [11-1] Main—SMDR Options—
SMDR Options—
Condition Code
"RC/VR"
Answered call Controls whether the time of answering an incoming CO line call
is shown.
13.1 [11-1] Main—SMDR Options—
SMDR Options—
Condition Code
"AN/VA"
Room status Controls whether room status changes are shown.
8.2 [6-2] Hotel—
SMDR for External Hotel Application 1—
Room Status Control
Timed Reminder call
Controls whether Timed Reminder calls are shown (®
17.1.4 Timed Reminder
).
8.2 [6-2] Hotel—
SMDR for External Hotel Application 1—
Timed Reminder (Wake-up Call)
Printing Message Specifies the messages that can be selected from an extension.
(® 13.1.11 Printing Message)
8.2 [6-2] Hotel—
SMDR for External Hotel Application 2—
Printing Message 1
–8
Time format Controls whether time is displayed in 12-hour or 24-hour format.
13.1 [11-1] Main—SMDR—
SMDR Format—Time Format
(12H / 24H)
Conditions
[General]
290 Feature Manual Document Version 2010-11
16.1.1 SMDR (Station Message Detail Recording)
To Next Page
Loading...
