Panasonic KX-TDA50

Time Mode
Switching
Description Condition
Automatic The current time mode will switch
automatically to another time mode
at the time programmed in the
tenant’s Time Table, and can be
switched manually by pressing the
Time Service button or by dialing the
Time Service Switch feature
number.
The current time mode (day/lunch/
break/night) and the switching mode
(automatic/manual) can be switched
manually by an extension assigned
as a manager, or by an extension
whose Class of Service (COS) is
authorized.
Manual The current time mode will switch
only when the Time Service button
is
pressed or when the Time Service
Switch feature number is dialed.
2. Time Table
Each
tenant has a Time Table that is used when the tenant is in Automatic Time Service Switching mode.
Each Time Table has four basic modes—day, lunch, break, and night—and also provides for multiple
"breaks", such as morning breaks and afternoon breaks, and multiple "days", such as the morning shift
and the afternoon shift following lunch.
A tenant’s Time Table is programmed to control when each time mode starts (and therefore, ends) and
can be programmed separately for each day of the week.
Each Time Table has a number which corresponds to the tenant number of the tenant it serves. (Tenant
1 uses Time Table 1, etc.)
[Programming Example: Time Table]
MON
TUE
Day 1
Lunch
Day 2
Break 1 start
Break 1 end
Break 2 start
Break 2 end
Night
Day 1
09:00
12:00
13:00
15:00
15:15
18:00
09:00
1234
15:00
18:30
19:00
20:30
20:45
22:30
22:45
01:00
15:00
11:00
22:00
11:00
12:00
15:00
18:00
06:00
21:00
21:15
06:15
Time Schedule
Time Table No. (Tenant No.)
[Visualization of Time Schedule for Tenant 1]
Time Table No. 1
09:0006:00 12:00 15:00 18:00 21:00 00:0000:00 03:00
Night NightDay 1 Day 2 Break 1Lunch
Monday Tuesday
Note that in this example, the day mode (Day 2) resumes automatically when the break mode (Break 1)
ends.
312 Feature Manual Document Version 2010-11
17.1.5 Time Service