Focus / Zoom – Selecting the AF Mode
178
[Tracking]
When the focus mode is set to [AFC], the AF area follows the movement of
the subject, maintaining focusing.
Start tracking.
≥Aim the AF area over the subject, and press the shutter button halfway.
The camera will track the subject while the shutter button is pressed
halfway or pressed fully.
•
If tracking fails, the AF area blinks red.
• When set to [AFS], the focus will be on the AF area position. Tracking will not work.
• How to manipulate the AF area (AF Area Operations: 188)
• In [ ]/[S&Q] mode and while recording video, tracking will continue even if
the shutter button is released.
To cancel tracking, press or , or touch [ ].
Tracking is also available with [AFS].
• When automatic detection is working, the detected subject is tracked.
• Set [Metering Mode] to [ ] to continue to adjust the exposure as well.
• [ ] may not be available due to the camera settings.
To Next Page
Loading...
Need help?
General
