Video Settings – Time Code
402
Setting the Time Code
Sets the recording, display, and output of the time code.
1
Set [Rec. File Format] to [MOV] or [Apple ProRes].
≥  []  []  [Rec. File Format]  [MOV]/[Apple
ProRes]
2
Select [Time Code].
≥  []  []  [Time Code]
[Time Code Display]
Displays the time code on the recording screen/playback screen.
• During video recording using the following function, the time code count
cannot be displayed on the recording screen:
– [Rec Quality] with a high frame rate video exceeding a recording frame rate
of 60.00p
• While you are using the following functions, the time code count cannot be
displayed on the recording screen:
– HDMI output
– Wi-Fi connection with a smartphone
– Tethered recording
[Count Up]
[REC RUN]: Counts the time code only when recording videos.
[FREE RUN]: Counts the time code also when video recording is stopped and
when the camera is turned off.
• When the following function is being used, [Count Up] is fixed to [REC RUN]:
– [S&Q] mode
To Next Page
Loading...
Need help?
General
