Panasonic LUMIX DC-G9M2 User Manual

Wi-Fi / Bluetooth – Wi-Fi Connections
678
[Direct]
Directly connect the camera and the destination device.
Select the method for connecting with the destination device.
[WPS Connection]
[WPS (Push-Button)]: Press the WPS button on the destination device to connect.
• On the camera, press [DISP.] to extend the connection wait time.
[WPS (PIN code)]: Enter the PIN code into the camera, and connect.
[Manual Connection]
Search for the camera on the destination device to connect.
1 Select the network authentication.
[WPA3]/[WPA3/WPA2]
• If [Wi-Fi Password] in [Wi-Fi Setup] is [OFF], this is not displayed if the
connected device is [Smartphone].
2 Enter the SSID and password displayed on the camera into the device.
• If [Wi-Fi Password] in [Wi-Fi Setup] is [OFF], the password is not displayed if
the connected device is [Smartphone].
Select the SSID to establish a connection. (Connecting to a Smartphone
([Wi-Fi connection]): 644)

Panasonic LUMIX DC-G9M2 Specifications

General

Sensor Resolution	25.2 MP
Effective Pixels	25.2 MP
Image Processor	Venus Engine
ISO Sensitivity	100-25600 (expandable to 50-25600)
Viewfinder	3.68 million dots
Mount	Micro Four Thirds
Sensor Type	MOS
Sensor Size	17.3 x 13.0 mm
Shutter Speed	1/8000 sec - 60 sec
Autofocus Points	779
Viewfinder Type	Electronic
Screen Size	3.0"
Video Resolution	4K (3840 x 2160) at 60p
Image Stabilization	5-axis in-body image stabilization (IBIS)
Memory Card Slot	Dual SD card slots (UHS-II)
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots
Weight	658 g (body only)
Autofocus System	Contrast Detection with DFD Technology
Screen	Free-angle Touch LCD (1.84 million dots)
Battery	DMW-BLK22 Lithium-ion