Drive / Shutter / Image Stabilizer – Image Stabilizer
269
Image Stabilizer Settings
Set the image stabilizer operation to match the recording situation.
Picture: [] [] Select [Image Stabilizer]
Video: [] [] Select [Image Stabilizer]
[Operation Mode]
Sets the stabilization movement (blur) to match the recording method (normal,
panning). ([Operation Mode]: 271)
[E-Stabilization (Video)]
Through the combined use of the in-lens, in-body, and electronic image stabilizers,
corrections are made to camera shake on 5 axes during video recording along the
vertical, horizontal, roll, pitch, and yaw axes, and to the peripheral distortion that
readily occurs when you are using a wide-angle lens. (5-Axis Hybrid Image Stabilizer)
([E-Stabilization (Video)]: 272)
[Boost I.S. (Video)]
Increases the effectiveness of the image stabilizer during video recording.
This effect can help provide a stable composition when you want to perform recording
from a fixed perspective. ([Boost I.S. (Video)]: 273)
[Anamorphic (Video)]
You can switch to an image stabilizer that suits anamorphic recording. ([Anamorphic
(Video)]: 273)
[Lens Information]
When using a lens that does not have a communication function with the camera,
register the lens information in the camera. ([Lens Information]: 274)
To Next Page
Loading...
