Wi-Fi / Bluetooth – Send Settings and Selecting Images
684
Selecting Images
When sending by [Send Images Stored in the Camera to PC], select the
images using the following procedure.
1
Select [Single Select] or [Multi Select].
2
Select the image.
[Single Select] setting
1 Press 21 to select an image.
2 Press or .
[Multi Select] setting
1 Press 3421 to select an image and then press or . (Repeat this)
• To cancel the setting, press or again.
• Images are displayed separately by card slot.
To switch the card to display, press [ ].
• Selecting images at once is possible only for the images in a single card.
2 Press [DISP.] to execute.
To Next Page
Loading...
Need help?
General
