Flash – Setting Flash
350
[Flash Adjust.]
You can adjust the flash output when taking pictures with the flash in TTL
output mode.
1
Select [Flash Adjust.].
≥ [] [] [Flash Adjust.]
2
Press 21 to adjust the flash output and then press
or .
• It can be adjusted within the range of [−3 EV] to [+3 EV] in 1/3 EV steps.
• [ ] is displayed on the recording screen.
• For information about adjusting the flash output when recording using a wireless
flash ([Flash Adjust.]: 357)
• [Flash Adjust.] cannot be used when the following are set:
– [Firing Mode]: [MANUAL]
– [Wireless]: [ON]
To Next Page
Loading...
