Panasonic LUMIX DC-G9M2 User Manual

Flash – Setting Flash
351
[Flash Synchro]
When a moving subject is recorded at night using a slow shutter and flash,
a trail of light may appear in front of the subject.
If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a
trail of light appearing behind the subject by firing the flash immediately
before the shutter closes.
 []  []  Select [Flash Synchro]
[1ST]
This is the normal method for recording with the Flash.
[2ND]
The light source appears behind the subject and the picture becomes dynamic.
• When [2ND] is set, [2nd] is displayed on the flash icon of the recording screen.
• When the following functions are being used, the setting is fixed to [1ST]:
– [Wireless]
– [Live View Composite]
• The effect may not be adequately achieved at faster shutter speeds.

Panasonic LUMIX DC-G9M2 Specifications

General

Sensor Resolution	25.2 MP
Effective Pixels	25.2 MP
Image Processor	Venus Engine
ISO Sensitivity	100-25600 (expandable to 50-25600)
Viewfinder	3.68 million dots
Mount	Micro Four Thirds
Sensor Type	MOS
Sensor Size	17.3 x 13.0 mm
Shutter Speed	1/8000 sec - 60 sec
Autofocus Points	779
Viewfinder Type	Electronic
Screen Size	3.0"
Video Resolution	4K (3840 x 2160) at 60p
Image Stabilization	5-axis in-body image stabilization (IBIS)
Memory Card Slot	Dual SD card slots (UHS-II)
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots
Weight	658 g (body only)
Autofocus System	Contrast Detection with DFD Technology
Screen	Free-angle Touch LCD (1.84 million dots)
Battery	DMW-BLK22 Lithium-ion