Flash – Setting Flash
348
[Firing Mode]/[Manual Flash Adjust.]
You can select whether to set the flash output automatically or manually.
1
Set the [Firing Mode].
≥ [] [] [Firing Mode]
[TTL]
Sets flash output to be set automatically by the camera.
[MANUAL]
Sets the flash output manually.
• With [TTL], you can record the images you want even when recording dark
scenes where the flash output tends to become greater.
• The flash output ([1/1], etc.) is displayed on the flash icon of the recording
screen.
• The settings made here are enabled when some flashes from other
manufacturers are attached.
Set on the flash when a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L:
optional) is attached.
To Next Page
Loading...
