Metering / Exposure / ISO Sensitivity – Program AE Mode
279
Program AE Mode
≥Program Shift: 281
In [P] mode (Program AE mode), the camera automatically sets the shutter
speed and aperture value for the brightness of the subject.
You can also use Program Shift to change combinations of shutter speed
and aperture values while keeping the same exposure.
1
Set the recording mode to [P].
≥Set the mode dial. (Selecting the Recording Mode: 75)
2
Press the shutter button halfway.
≥This displays the aperture value and shutter speed value on the
recording screen.
To Next Page
Loading...
