Drive / Shutter / Image Stabilizer – Image Stabilizer
271
[Operation Mode]
Set the stabilization movement (blur) to match the recording method
(normal, panning).
[Normal]
Corrects vertical, horizontal, and rotational camera shake.
This function is suitable for normal recording.
[Panning (Left/Right)]
Corrects vertical camera shake.
This is suitable for horizontal panning.
[Panning (Up/Down)]
Corrects horizontal camera shake.
This is suitable for vertical panning.
[OFF]
Turns the image stabilization function OFF.
• The [Operation Mode] that can be used differ depending on the lens used.
• [Operation Mode] is fixed to [ ] ([Normal]) when using other manufacturers’
lenses with an image stabilization function.
• When using lenses with an O.I.S. switch, the camera’s operation mode cannot be
set to [OFF]. Set the switch on the lens to [OFF].
• When the following functions are being used, [Operation Mode] switches to [ ]
([Normal]):
– [ ] mode
– [S&Q] mode
– Video recording
To Next Page
Loading...
