Drive / Shutter / Image Stabilizer – Taking Burst Pictures
215
SH Pre-burst Recording
The camera also records images for the set amount of time during the
period between when the shutter button is pressed halfway and when it is
pressed fully.
In [SH Burst Pre-Recording Time] you can set the length of time recordings
are made before the shutter is pressed fully.
(A) [SH Burst Pre-Recording Time]
(B) Recorded range
[] [] [Burst Shot Setting] [SH Burst Pre-Recording
Time]
[1.5SEC]
Recording starts from 1.5 seconds before the shutter button was pressed fully.
[1.0SEC]
Recording starts from 1 second before the shutter button was pressed fully.
[0.5SEC]
Recording starts from 0.5 seconds before the shutter button was pressed fully.
• The setting for [SH Burst Pre-Recording Time] is applied to both [Burst Shot 1
Setting] and [Burst Shot 2 Setting].
• [PRE] is displayed on the recording screen during SH pre-burst recording.
• If the shutter button is pressed and held at halfway for approx. 1 minute, the frames
before pressing fully cannot be saved. Press the shutter button halfway again.
To Next Page
Loading...
