Using an External SSD (Commercially Available) – Connecting the External SSD
476
Removing the External SSD
1 Set [USB-SSD] to [OFF].
• [] [] [USB-SSD] [OFF]
2 Confirm that the USB-SSD icon on the screen changes to the card icon, then
unplug the USB connection cable from the camera.
• It may take a while for the external SSD to be recognized.
• When [USB-SSD] is set to [ON], you cannot use a card even if a card has been
inserted. To use a card, set [USB-SSD] to [OFF].
• [ ] is displayed on the screen while writing to the external SSD.
• While the USB-SSD icon is being displayed on the screen, do not perform any of
the following operations.
The camera may operate incorrectly or the external SSD and recorded images
may be damaged.
– Disconnect the USB connection cable.
– Remove the battery or disconnect the power plug.
– Subject the camera or external SSD to vibration, impacts, or static electricity.
To Next Page
Loading...
Need help?
General
