Camera Customization – [Custom] Menu
593
[Lens Fn Button Setting]
[Aperture Ring Increment]
[Focus Stop] / [AF Mode] / [AF Detection Setting] / [Detecting Subject] / [Focus
Ring Lock] / [AE LOCK] / [AF LOCK] / [AF/AE LOCK] / [AF-ON] / [AF-ON : Near
Shift] / [AF-ON : Far Shift] / [AF-Point Scope] / [Focus Area Set] / [Enlarged Live
Display(Video)] / [Image Stabilizer] / [Preview] / [Preview Aperture Effect] / [No
Setting] / [Off (Disable Press and Hold)] / [Restore to Default]
Register a function to the focus button of an interchangeable lens.
• When [Focus Stop] is set, focus is fixed while the focus button is being pressed.
[SMOOTH] / [1/3EV]
Stops for setting the aperture value with the aperture ring can be changed.
[SMOOTH]: You can finely adjust the aperture value.
[1/3EV]: You can set the aperture value at 1/3 EV stops.
• This can be used when a lens compatible with a clickless aperture ring (H-X1025/
H-X2550: optional) is attached. (As of September 2023)
• When taking pictures, this setting will take effect if the aperture ring is set to a
position other than [A].
• If the position of the aperture ring is set to [A], the aperture value set by the
camera will take effect and can be adjusted like with [1/3EV].
• During video recording, fine adjustments can be made like with [SMOOTH].
• When [SMOOTH] is set, fractions of aperture values are not displayed on the
screen.
To Next Page
Loading...
