Wi-Fi / Bluetooth – Sending Images from the Camera to a PC
670
1
Select the method for sending images on the camera.
≥  []  []  [Wi-Fi]  [Wi-Fi Function]  [New
Connection]  [Send Images to PC While Recording]/[Send
Images Stored in the Camera to PC]
2
Connect the camera and PC by Wi-Fi.
≥Select [Via Network] ([Via Network]: 674) or [Direct] ([Direct]:
678), and then connect.
3
Enter the computer name of the PC you want to connect
to (for Mac, the NetBIOS name).
• How to enter characters (Entering Characters: 100)
• Create a PC account name (up to 254 characters) and password (up to
32 characters) consisting of alphanumeric characters.
A destination folder may not be created if the account name includes
non-alphanumeric characters.
• When the computer name (NetBIOS name for Mac) contains a space (blank
character), etc., it may not be recognized.
In that case, we recommend changing the name to one consisting only of 15 or
less alphanumeric characters.
• Refer to the operating instructions for your PC or Help on the OS for detailed
setting procedures.
To Next Page
Loading...
Need help?
General
