Materials – Troubleshooting
741
The recorded image is too bright or dark.
•
Ensure AE Lock is not set where it is not appropriate. (Locking Focus and
Exposure (AF/AE Lock): 300)
Multiple images are recorded at once.
•
When drive mode is set to [ ] (Burst Shot 1) or [ ] (Burst Shot 2), pressing
and holding the shutter button will take burst pictures. (Selecting the Drive Mode:
210)
• When [Bracketing] is set, then pressing the shutter button records multiple images
while automatically changing the settings. (Bracket Recording: 245)
The subject is not focused properly.
•
Confirm the following details:
– Is the subject outside of the focus range?
– Is [Shutter AF] set to [OFF]? ([Shutter AF]: 567)
– Is [Focus/Shutter Priority] set to [RELEASE]? ([Focus/Shutter Priority]: 564)
– Is AF Lock (Locking Focus and Exposure (AF/AE Lock): 300) set where it is not
appropriate?
– Is [Focus Limiter] set to [ON]? ([Focus Limiter]: 163)
– Is [AF Micro Adjustment] set? ([AF Micro Adjustment]: 167)
Cannot focus or zoom with the lens.
•
Confirm the following details:
– Is [Focus Ring Lock] set to [ON]? ([Focus Ring Lock]: 566)
To Next Page
Loading...
