Materials – Troubleshooting
751
The PC is not recognized when I use a Wi-Fi connection. The
camera cannot be connected to the PC using the Wi-Fi function.
•
At the time of purchase, this camera is set to use a workgroup name of
“WORKGROUP”.
If you have changed the workgroup name of the PC, this will not be recognized.
In the [Wi-Fi Setup] menu, [PC Connection], change the workgroup name of the PC
to which to connect. ([PC Connection]: 685)
• Check that the login name and password are correctly typed.
• When the clock settings of the PC connected to the camera differs considerably from
those of the camera, the camera cannot be connected to the PC depending on the
OS.
Transmission of the image fails midway. Some images cannot be
transmitted.
•
Is the size of the image too large?
– Reduce the image size at [Size] ([Size]: 683), and then send.
– Transmit after dividing the video with [Video Divide] ([Video Divide]: 490).
• File format of the video that can be sent differs depending on the destination.
(Images That Can be Sent: 672)
I have forgotten the password for the Wi-Fi.
•
In the [Setup] ([Setting]) menu, [Reset], reset network settings. ([Reset]: 99)
However, all information set in [Wi-Fi Setup] and [Bluetooth] will also be reset.
To Next Page
Loading...
Need help?
General
