155
SQW0566
Adjusting the focus and brightness (exposure)
Taking pictures with Auto Focus
Determined position for focus (1-area-focusing) /
(Pinpoint-focusing)
Determined position for focus (1-area-focusing)
(1-area-focusing)
Focuses on AF area in centre of picture. (Recommended when focus is difficult to align)
• You can change the position and size of the AF area. (→157)
Locking the focus
If a subject you want to record is not in the centre,
follow the steps below. (Only when [AFS/AFF/AFC]
in [Rec] menu is set to [AFS].)
Focus display
( When focus is aligned: illuminated
When focus is not aligned: flashing)
AF area
(When focus is aligned: green)
1
Adjust focus according to
subject
Align the AF
area with the
subject
Hold down
halfway
2
Return to desired composition
Press fully
(Pinpoint-focusing)
Enables more precise focusing on a smaller point than [ ] (1-area-focusing).
●
You can set the focus position using the enlarged screen. (→159)
●
When you press the shutter button halfway, an enlarged display of the focus position appears.
●
You can set the timeout for the enlarged display using [Pinpoint AF Time] in the [Custom] menu.
(→160)
●
If [ ] (Pinpoint-focusing) is selected while recording motion pictures or 4K photos, the setting is
changed to [
] (1-area-focusing).
●
Cannot set to [ ] (Pinpoint-focusing) in the following case:
• When [AFS/AFF/AFC] in [Rec] menu is set to [AFF] or [AFC]
To Next Page
Loading...
