383
SQW0566
Others
Q&A
Troubleshooting
Try checking these items (→383 - 397) first.
If the problem persists,
Performing [Reset] in the [Setup] menu may resolve the issue (→86). (Note that
except for some items such as [Clock Set], all settings are returned to their values at
the time of purchase.)
Also, see the Panasonic support site for the latest support information.
http://panasonic.jp/support/global/cs/dsc/
(This site is available in English only.)
â–
Battery, power
The charging lamp blinks.
• Charging is being performed in a place with extremely high or low temperature.
→ Reconnect the USB connection cable (supplied) and retry charging in a place where ambient
temperature is 10 °C to 30 °C (50 °F to 86 °F) (temperature conditions also apply to the battery
itself).
• Charging is not possible if the power supply capacity of the computer is low.
Camera does not work even if the camera is turned on. Camera switches off as soon as the
camera is turned on.
• Battery needs recharging.
→ Turn the camera off frequently by using the [Economy] etc. (→81)
This unit is turned off automatically.
• [Economy] is activated. (→81)
• The linked operation of VIERA Link (HDMI) is enabled.
→ If you are not using VIERA Link (HDMI), set [VIERA Link] to [OFF]. (→84)
Card/battery door does not close.
• Insert the battery securely all the way in. (→26, 27)
The battery runs down quickly.
• [4K PHOTO] is set to [
] ([4K Pre-Burst]).
→ When [
] ([4K Pre-Burst]) has been selected, the battery drains faster.
Select [
] ([4K Pre-Burst]) only when recording.
• The Wi-Fi connection has been on for a long time.
→ The battery is used up faster with a Wi-Fi connection. Turn off the camera as often as possible
using [Economy] (→81) or other methods.
To Next Page
Loading...
Need help?
General
