Panasonic NV-RX37A - Demonstration Mode.75

0 Sepia Mode (- ♦ 43)
0 BiacK-and-White Mode (-» 43)
0 Digital Fade 1 Mode 45)
0 Digital Fade 2 Mode (-> 45)
0 Digital Fade 3 Mode (-fr 45)
0 Demonstration Mode
Demonstration Mode
If you connect the AC Adaptor to the Movie Camera,
turn the Movie Camera on without any cassette
inserted, and leave it on for approximately 10 minutes
without performing any operation, it automatically
switches over to the Demonstration Mode. The Movie
Camera remains in this mode until you turn it off and
disconnect the AC Adaptor.
Cancelling the Demonstration Mode
Set [DEMO MODE} on the [MAIN MENU] Menu to
[OFF].
Or, turn in the [POWER] Switch to turn the Movie
Camera off, then turn it out again while pressing the
[STOP] Button. (This cancels the Demonstration Mode
even if [DEMO MODE] on the [MAIN MENU] Menu is
still set to [ON].)
Reactivating the Demonstration Mode
Set [DEMO MODE] on the [MAIN MENU] Menu to [ON].
Or, turn out the [POWER] Switch while pressing the
[PLAY] Button. (This reactivates the Demonstration
Mode even if [DEMO MODE] on the [MAIN MENU]
Menu is still set to [OFF].)
75