110 - ENGLISH
Ceiling mount bracket safeguards
f When installing the projector to a ceiling, be sure to use the specied optional Ceiling Mount Bracket for Projectors.
Model No.: ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKL430B (Projector Mount Bracket)
f When installing the projector, attach the drop-prevention kit included with the Ceiling Mount Bracket for Projectors.
f Ask a qualied technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not
manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector
has not expired.
f Unused products must be removed promptly by a qualied technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specied tightening torques. Do not use electric
screwdrivers or impact screwdrivers.
f Read the Installation Instructions for the Ceiling Mount Bracket for Projectors for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
rSpecication for the screw holes to x the projector (projector bottom view)
Unit: mm (inch)
M4 × 0.7
10 mm (13/32")
Torque: M4 1.25 ± 0.2 N·m
rDimensions for the screw holes to x the projector (projector bottom view)
Unit: mm (inch)
30 (
1-3/16"
)
226 (
8-29/32"
)
69 (
2-23/32"
)
13 (
1/2"
)
147 (
5-25/32"
)
192 (
7-9/16"
)
280 (
11-1/32"
)
21 (
13/16"
)
Chapter 7 Appendix - Ceiling mount bracket safeguards
To Next Page
Loading...
