Panasonic PT-TX430 - Using the Freeze Function; Using the AV Mute Function; Using the Presentation Timer Function; Switching the Brightness of the Light Source

42 - ENGLISH
Using the freeze function
You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
button
1) Press the <FREEZE> button on the remote control.
f The video is paused and the audio is muted. The icon is displayed on the screen during Freeze.
2) Press the <FREEZE> button again.
f The video playback resumes and the audio is unmuted.
Using the AV mute function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and image temporarily.
button
1) Press the <AV MUTE> button on the remote control.
f The audio and image turn off.
2) Press the <AV MUTE> button again.
f The audio and image turn on.
Using the presentation timer function
You can operate the P-timer function.
Presentations, etc. can be performed while checking the elapsed time.
button
1) Press the <P-TIMER> button on the remote control.
f The count is started.
f The elapsed time is displayed at the bottom right of the projected image.
2) Press the <P-TIMER> button again.
f The count is stopped.
3) Press the <P-TIMER> button again.
f P-timer is nished.
Switching the brightness of the light source
This function allows you to switch the brightness of the light source.
button
1) Press the <LAMP> button on the remote control.
f It will switch each time you press the button, [ (Normal)] → [ (Eco)] →[ (Quiet)] → [ (Normal)] →....
Note
f For details, please refer to the [Setting] menu → [Lamp control] (x page 56).
Using the digital zoom function
(Only for still image-based signals input)
You can enlarge the center of the projected image. You can also change the location of the area to be enlarged.
Chapter 3 Basic Operations - Basic operations by using the remote control