Panasonic PT-TX430

80 - ENGLISH
Network connection
This projector has network function that allows the following by connecting a computer. The wireless module (Model No.:
ET-WML100) of the optional accessories is required if you want to use the network function through the wireless LAN.
f WEB control
By accessing to the projector from a computer, you can perform setting, adjustment, status display, etc. of the projector.
Refer to “Web control function” (x page 84) for details.
f Multi Monitoring & Control software
“Multi Monitoring & Control Software”, a software application to monitor and control multiple display devices (projector or at
panel display) connected to intranet, can be used.
Plug-in software “Early Warning Software”, which monitors the status of the display devices and their peripherals within an
intranet, and noties of abnormality of such equipment and detects the signs of possible abnormality, can also be used.
For details, visit the Panasonic website (https://panasonic.net/cns/projector/).
f Image transfer application software
Using the Panasonic image transfer application software, the image sent from a device can be displayed as a projected
image.
For details on how to use the image transfer application software “Presenter Light” compatible with Windows
computers, please refer to the Operating Instructions of the “Presenter Light” software. The “Presenter Light” software
can be downloaded by accessing the projector via a web browser. For details, please refer to “About Presenter Light”
(x page 83). The applicaton software and its operating instructions can be downloaded from our website
(https://panasonic.net/cns/projector/).
For details of the image transfer application software “Wireless Projector” compatible with the iPad/iPhone/iPod touch or
Android device, refer to the Panasonic website (https://panasonic.net/cns/projector/).
f PJLink
By using PJLink protocol, you can send inquiries about the operations or status of the projector from a computer. Refer to
“Using the PJLink protocol” (x page 100) for details.
When connecting via wired LAN
Connection example
AC IN
LAN cable (straight)
LAN cable (straight)
Hub
Computer
Projector
r Name and function of <LAN> terminal
1 2 3
1 LAN LINK/ACT lamp (yellow)
Lights on when connected.
Blinks when transmitting/receiving data.
2 <LAN> terminal (10BASE-T/100BASE-TX)
Used to connect LAN cable here.
3 LAN 10/100 lamp (green)
Lights on when connected to the 100BASE-TX.
Chapter 5 Operation of Function - Network connection