36 - ENGLISH
Powering Off the Projector
1) 2)
3)
1) 2)
1) Press the power <v/b> button.
f The power-off conrmation screen is displayed.
2) Press the power <v/b> button again.
f Projection of the image will stop, and the power indicator <ON(G)/STANDBY(R)> blinks in red. (The fan keeps running.)
3) Wait until the power indicator <ON(G)/STANDBY(R)> lights in red.
f The projector enters standby mode when the power indicator <ON(G)/STANDBY(R)> lights in red.
4) Disconnect the plug of the power cord from the outlet.
Note
f While the power indicator <ON(G)/STANDBY(R)> is blinking in red, the lamp is being cooled down and the projector cannot
be turned on. Wait until the power indicator <ON(G)/STANDBY(R)> lights in red to turn on the projector again.
f When packing the projector for transportation and storage, please make sure that the power indicator is off.
f Even if the power is turned off by pressing the power <v/b> button, the projector consumes power if the power plug is
connected to the outlet.
When the [Setting] menu → [Standby mode] is set to [Eco], use of some functions is restricted, but the power consumption
during standby mode can be conserved.
Chapter 3 Basic Operations - Powering on/off
To Next Page
Loading...
