ENGLISH - 39
Adjusting adjustable feet
By pressing the adjustable feet lock with your nger, the adjustable feet lock is released and becomes free. It will be locked
when you release the nger. Lift the front side of the projector while pressing the adjustable feet lock with your nger, and
release your nger until the projection position is aligned.
For slight adjustment, rotate the adjustable feet.
Rotate the adjustable feet to extend it as shown in the gure, and rotate it in the opposite direction to contract it.
Feet lock
Feet lock
Maximum adjustable range
Adjustable feet : 40 mm (1-9/16”)
Attention
f Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
the adjustable feet.
f Adjust from the [Expand] menu → [Keystone] (x page 61) when the projected image is distorted.
Chapter 3 Basic Operations - Projecting
To Next Page
Loading...
