58 - ENGLISH
[ (Off)]
Enables the button operations on the control panel or the remote control.
[ (Projector)]
Disables the button operations on the control panel.
[ (Remote control)]
Disables the button operations on the remote control.
[Iris]
Aperture correction and signal compensation are performed automatically based on the image to result in an image of
optimum contrast.
1) Press as to select [Iris].
2) Press the <ENTER> button.
3) Press as to switch the item.
f The items will switch each time you press the button.
[On]
Corrects the aperture.
[Off]
No aperture correction.
[Sound]
You can perform more detailed setting for Audio.
Adjusting the volume
1) Press as to select [Sound].
2) Press the <ENTER> button.
f The [Sound] screen is displayed.
3) Press as to select [Volume].
4) Press the <ENTER> button.
5) Press as to adjust the level.
f You can also press the <VOLUME +/-> button on the remote control. (x page 43)
Operation Adjustment Range
Press the a button.
Turns up the volume.
0 ~ +25
Press the s button.
Turns down the volume.
Setting the mute
1) Press as to select [Sound].
2) Press the <ENTER> button.
f The [Sound] screen is displayed.
3) Press as to select [Mute].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
f You can also press the <MUTE> button on the remote control. (x page 43)
[On]
Audio is not output.
[Off]
Audio is output.
[HDMI Setup]
Switch the setting when the external equipment is connected to the <HDMI IN> terminal of the projector and the image is not
projected correctly. Or switch the setting of the audio input.
[Image]
1) Press as to select [HDMI Setup].
Chapter 4 Settings - [Setting] menu
To Next Page
Loading...
