Parker 650V series - The Menu System

Installing the Drive 3-17
650V AC Drive
Terminal Block Acceptance Sizes
Wire sizes for Europe should be chosen with respect to the operating conditions and your local
National Electrical Safety Installation Requirements. Local wiring regulations always take
precedence. For North American UL wire sizes refer to Chapter 10: “Certification for the Drive”
- Requirements for UL Compliance.
Product Code
Power Terminals
(minimum/maximum acceptance for aperture)
Control Terminals
including Thermistor Terminals
690PC/...
0.75 / 10mm
2
(*16mm
2
) 2.5 mm
2
690PD/0150/...
690PD/0180/...
690PD/0220/...
2.5 / 16mm
2
(* 25mm
2
) 2.5 mm
2
690PD/0300/...
2.5 / 25mm
2
(* 35mm
2
) 2.5 mm
2
Solid
Stranded
690PE/...
16 / 50mm
2
25 / 50mm
2
(* 70mm
2
) 2.5 mm
2
690PF/...
25/120mm
2
35 / 95mm
2
(*120mm
2
) 2.5 mm
2
Note: The standard Frame E and Frame F terminals are not intended for flat busbar. A Power Terminal adaptor is
available to enable wiring with flat busbar, part number BE465483.
* The larger wire sizes can be used provided a crimp is fitted to the wire
Terminal Tightening Torques
Frame Size
Model Recognition
Thermistor
Power
Brake
Ground
Product Code
(Block 2 & 3)
Catalog Code
(Block 2 & 3)
& fan
supply
Terminals
Terminals
Terminals
Frame C 230V
0055/230
0075/230
0007/230
0010/230
N/A
1.35Nm
(12 lb-in)
1.35Nm
(12 lb-in)
2.5Nm
(22 lb-in)
Frame C 400/500V
0055/400
0055/500
0007/460 N/A
1.35Nm
(12 lb-in)
1.35Nm
(12 lb-in)
2.5Nm
(22 lb-in)
Frame C 400/500V
0075/400
0110/400
0150/400
0075/500
0110/500
0150/500
0010/460
0015/460
0020C/460
N/A
1.35Nm (12 lb-in)
enclosed terminal type
1.8Nm (16 lb-in)
open terminal type
1.35Nm
(12 lb-in)
2.5Nm
(22 lb-in)
Frame D All All N/A
4Nm
(35 lb-in)
4Nm
(35 lb-in)
4.5Nm
(40 lb-in)
Frame E All All
0.7Nm
(6.1 lb-in)
6-8Nm
(53-70 lb-in)
6-8Nm
(53-70 lb-
in)
6-8Nm
(53-70 lb-in)
Frame F All All
0.7Nm
(6.1 lb-in)
15-20Nm
(132-177 lb-in)
0.7Nm
(6.1 lb-in)
42Nm
(375 lb-in)