Page C-2 HandiLaz Mini Operator’s Manual
Appendix C: Printer Setup
6
As each of the Function Setting Mode statements are printed, respond with the
FEED
or
CHARGE
switch to achieve the following settings:
About the BAUD RATE: Continue pressing CHARGE (no) until
BAUD RATE
= 9600
prints. Then, press
FEED
(yes)
After
FEED
(yes) is pressed in response to the print line
BAUD RATE = 9600
,
the printer will respond with
SETTING COMPLETED
.
The printer is ready for use.
ENTER MODE SETTING[YES/NO]
Press
FEED
(yes)
COMMAND MODE = MODE B
CHARACTER SET = GRAPHICS
ENTER SERIAL SETTING[YES/NO]
Press
FEED
(yes)
BIT LENGTH = 8BIT
PARITY = NONE
FLOW CONTROL = RTS/CTS
BAUD RATE = 9600bps
To Next Page
Loading...
