Particle Measuring Systems LASAIR II 550L Operator's Manual


Page Page 8-18 8-18 LASAIR LASAIR II II Operator’s Operator’s ManualManual
Chapter 8: Statistics ModeChapter 8: Statistics Mode
When All Samples Are CompleteWhen All Samples Are Complete
When all samples are complete, the following dialog When all samples are complete, the following dialog box will appear:box will appear:
Press the Enter button to acknowledge the dialog box.Press the Enter button to acknowledge the dialog box.
Figure 8-5: Statistics Table ScreenFigure 8-5: Statistics Table Screen
Click these softkeysClick these softkeys
to see the previous 10to see the previous 10
records or the next 10records or the next 10
records.records.
The number of samples collected at aThe number of samples collected at a
location. These numbers are location. These numbers are coloredcolored
red if there are red if there are insufficieninsufficient samples.t samples.
The name of the locationThe name of the location
sampledsampled
This data is displayedThis data is displayed
ininRedRedif the averageif the average
exceeds theexceeds the TargetTarget
ValueValue
For BS-5295, only the smallest channel is shownFor BS-5295, only the smallest channel is shown

Particle Measuring Systems LASAIR II 550L Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 550L
Category	Measuring Instruments
Language	English