Analog Data Setup ScreenAnalog Data Setup Screen
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
5-195-19
Analog Data Setup ScreenAnalog Data Setup Screen
To display the Analog Data Setup Screen:To display the Analog Data Setup Screen:
11 Press Press the the second second softkey softkey on on the the Main Main Display Display Screen Screen . . The The Main Main SetupSetup
Screen will be displayed.Screen will be displayed.
22
Press Press the the second second softkey softkey on on the the Main Main Setup Setup Screen Screen . . TheTheAnalog DataAnalog Data
Setup ScreenSetup Screenwill open:will open:
Figure 5-11: Analog Data Setup ScreenFigure 5-11: Analog Data Setup Screen
4–20 mA4–20 mA
AnalogAnalog
Setup TableSetup Table
UserUser
Channels (4)Channels (4)
EnabledEnabled
DisabledDisabled
Table 5-2: Analog Data Setup Screen Fields and ButtonsTable 5-2: Analog Data Setup Screen Fields and Buttons
FiFieleld od or Br Bututtotonn FuFuncnctitionon
T/rhT/rh
Enables or disables the optional Enables or disables the optional TTemperature/Relativeemperature/Relative
Humidity (T/RH) sensor mounted on top of the LASAIR II.Humidity (T/RH) sensor mounted on top of the LASAIR II.
Units (Deg CUnits (Deg C
or Deg F)or Deg F)
This group box relates to the T/RH field, and determinesThis group box relates to the T/RH field, and determines
whether the temperature readings will be displayed inwhether the temperature readings will be displayed in
Centigrade or Fahrenheit.Centigrade or Fahrenheit.
NameName
Enter up to 16 alphanumeric characters for the name of anyEnter up to 16 alphanumeric characters for the name of any
additional analog additional analog sensor.sensor.
UnitsUnits
Enter up to 10 alphanumeric characters to describe theEnter up to 10 alphanumeric characters to describe the
measurement units that will print.measurement units that will print.