Particle Measuring Systems LASAIR II 550L - Chapter 5: Setup; Sampling Setup Screen; Alarm Setup Screen; Communications Setup Screen


Sampling Setup ScreenSampling Setup Screen
LASAIR II Operator’s ManualLASAIR II Operator’s Manual
PagePage
5-35-3
Sampling Setup ScreenSampling Setup Screen
The sampling setup screen is comprised of three pagThe sampling setup screen is comprised of three pages, each of which containes, each of which contain
sampling setup options. The most commonly used setup sampling setup options. The most commonly used setup functions are on thefunctions are on the
Main page. The pages and their functions follow:Main page. The pages and their functions follow:
Main Page Setup FunctionsMain Page Setup Functions
••
Location nameLocation name
•• Sample sizeSample size
•• Number of samplesNumber of samples
•• Continuous samplingContinuous sampling
•• Print average of samplesPrint average of samples
•• Group repeat modeGroup repeat mode
•• Print sample reportPrint sample report
Advanced Page Setup FunctionsAdvanced Page Setup Functions
•• Sample typeSample type
••
Initial delay / Purge delayInitial delay / Purge delay
•• Inter-sample delayInter-sample delay
•• Sample by time-of-daySample by time-of-day
•• Save setting as recipeSave setting as recipe
•• Units (cf or cm)Units (cf or cm)
•• Data (raw or normalized)Data (raw or normalized)
•• 0.5 and 5.0 µm channels only (Pharmaceutical mode)0.5 and 5.0 µm channels only (Pharmaceutical mode)
•• Beep modeBeep mode
Location Page Setup FunctionsLocation Page Setup Functions
•• Select location nameSelect location name
•• Edit location nameEdit location name
•• Add new location nameAdd new location name
•• Delete location nameDelete location name
•• Add number locations 001-100Add number locations 001-100
•• Erase all location namesErase all location names